libpurple/network.h

/* purple
 *
 * Purple is the legal property of its developers, whose names are too numerous
 * to list here.  Please refer to the COPYRIGHT file distributed with this
 * source distribution.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02111-1301  USA
 */

#ifndef PURPLE_NETWORK_H
#define PURPLE_NETWORK_H
/**
 * SECTION:network
 * @section_id: libpurple-network
 * @short_description: <filename>network.h</filename>
 * @title: Network API
 */

#include <glib.h>

G_BEGIN_DECLS

/**************************************************************************/
/* Network API                                                            */
/**************************************************************************/

typedef struct _PurpleNetworkListenData PurpleNetworkListenData;

typedef void (*PurpleNetworkListenCallback) (int listenfd, gpointer data);

/**
 * purple_network_set_public_ip:
 * @ip: The local IP address.
 *
 * Sets the IP address of the local system in preferences.  This
 * is the IP address that should be used for incoming connections
 * (file transfer, direct IM, etc.) and should therefore be
 * publicly accessible.
 */
void purple_network_set_public_ip(const char *ip);

/**
 * purple_network_get_public_ip:
 *
 * Returns the IP address of the local system set in preferences.
 *
 * This returns the value set via purple_network_set_public_ip().
 * You probably want to use purple_network_get_my_ip() instead.
 *
 * Returns: The local IP address set in preferences.
 */
const char *purple_network_get_public_ip(void);

/**
 * purple_network_get_local_system_ip:
 * @fd: The fd to use to help figure out the IP, or else -1.
 *
 * Returns the IP address of the local system.
 *
 * You probably want to use purple_network_get_my_ip() instead.
 *
 * Note: The returned string is a pointer to a static buffer. If this
 *       function is called twice, it may be important to make a copy
 *       of the returned string.
 *
 * Returns: The local IP address.
 */
const char *purple_network_get_local_system_ip(int fd);

/**
 * purple_network_get_all_local_system_ips:
 *
 * Returns all IP addresses of the local system.
 *
 * Note: The caller must free this list.  If libpurple was built with
 *       support for it, this function also enumerates IPv6 addresses.
 *
 * Returns: (element-type utf8) (transfer full): A list of local IP addresses.
 */
GList *purple_network_get_all_local_system_ips(void);

/**
 * purple_network_get_my_ip:
 * @fd: The fd to use to help figure out the IP, or -1.
 *
 * Returns the IP address that should be used anywhere a
 * public IP addresses is needed (listening for an incoming
 * file transfer, etc).
 *
 * If the user has manually specified an IP address via
 * preferences, then this IP is returned.  Otherwise the
 * IP address returned by purple_network_get_local_system_ip()
 * is returned.
 *
 * Note: The returned string is a pointer to a static buffer. If this
 *       function is called twice, it may be important to make a copy
 *       of the returned string.
 *
 * Returns: The local IP address to be used.
 */
const char *purple_network_get_my_ip(int fd);

/**
 * purple_network_listen:
 * @port: The port number to bind to.  Must be greater than 0.
 * @socket_family: The protocol family of the socket.  This should be
 *                 AF_INET for IPv4 or AF_INET6 for IPv6.  IPv6 sockets
 *                 may or may not be able to accept IPv4 connections
 *                 based on the system configuration (use
 *                 purple_socket_speaks_ipv4 to check).  If an IPv6
 *                 socket doesn't accept V4-mapped addresses, you will
 *                 need a second listener to support both v4 and v6.
 * @socket_type: The type of socket to open for listening.
 *               This will be either SOCK_STREAM for TCP or SOCK_DGRAM for UDP.
 * @map_external: Should the open port be mapped externally using
 *                NAT-PNP or UPnP?  (default should be %TRUE)
 * @cb: (scope call): The callback to be invoked when the port to listen on is
 *      available. The file descriptor of the listening socket will be
 *      specified in this callback, or -1 if no socket could be established.
 * @cb_data: extra data to be returned when cb is called
 *
 * Attempts to open a listening port ONLY on the specified port number.
 * You probably want to use purple_network_listen_range() instead of this.
 * This function is useful, for example, if you wanted to write a telnet
 * server as a Purple plugin, and you HAD to listen on port 23.  Why anyone
 * would want to do that is beyond me.
 *
 * This opens a listening port. The caller will want to set up a watcher
 * of type PURPLE_INPUT_READ on the fd returned in cb. It will probably call
 * accept in the watcher callback, and then possibly remove the watcher and
 * close the listening socket, and add a new watcher on the new socket accept
 * returned.
 *
 * Libpurple does not currently do any port mapping (stateful firewall hole
 * poking) for IPv6-only listeners (if an IPv6 socket supports v4-mapped
 * addresses, a mapping is done).
 *
 * Returns: A pointer to a data structure that can be used to cancel
 *          the pending listener, or %NULL if unable to obtain a local
 *          socket to listen on.
 */
PurpleNetworkListenData *purple_network_listen(unsigned short port,
	int socket_family, int socket_type, gboolean map_external,
	PurpleNetworkListenCallback cb, gpointer cb_data);

/**
 * purple_network_listen_range:
 * @start: The port number to bind to, or 0 to pick a random port.
 *         Users are allowed to override this arg in prefs.
 * @end: The highest possible port in the range of ports to listen on,
 *       or 0 to pick a random port.  Users are allowed to override this
 *       arg in prefs.
 * @socket_family: The protocol family of the socket.  This should be
 *                 AF_INET for IPv4 or AF_INET6 for IPv6.  IPv6 sockets
 *                 may or may not be able to accept IPv4 connections
 *                 based on the system configuration (use
 *                 purple_socket_speaks_ipv4 to check).  If an IPv6
 *                 socket doesn't accept V4-mapped addresses, you will
 *                 need a second listener to support both v4 and v6.
 * @socket_type: The type of socket to open for listening.
 *               This will be either SOCK_STREAM for TCP or SOCK_DGRAM for UDP.
 * @map_external: Should the open port be mapped externally using
 *                NAT-PNP or UPnP?  (default should be %TRUE)
 * @cb: (scope call): The callback to be invoked when the port to listen on is
 *      available. The file descriptor of the listening socket will be
 *      specified in this callback, or -1 if no socket could be established.
 * @cb_data: extra data to be returned when cb is called
 *
 * Opens a listening port selected from a range of ports.  The range of
 * ports used is chosen in the following manner:
 * If a range is specified in preferences, these values are used.
 * If a non-0 values are passed to the function as parameters, these
 * values are used.
 * Otherwise a port is chosen at random by the operating system.
 *
 * This opens a listening port. The caller will want to set up a watcher
 * of type PURPLE_INPUT_READ on the fd returned in cb. It will probably call
 * accept in the watcher callback, and then possibly remove the watcher and close
 * the listening socket, and add a new watcher on the new socket accept
 * returned.
 *
 * Libpurple does not currently do any port mapping (stateful firewall hole
 * poking) for IPv6-only listeners (if an IPv6 socket supports v4-mapped
 * addresses, a mapping is done).
 *
 * Returns: A pointer to a data structure that can be used to cancel
 *          the pending listener, or %NULL if unable to obtain a local
 *          socket to listen on.
 */
PurpleNetworkListenData *purple_network_listen_range(
	unsigned short start, unsigned short end, int socket_family,
	int socket_type, gboolean map_external,
	PurpleNetworkListenCallback cb, gpointer cb_data);

/**
 * purple_network_listen_cancel:
 * @listen_data: This listener attempt will be cancelled and
 *        the struct will be freed.
 *
 * This can be used to cancel any in-progress listener connection
 * by passing in the return value from either purple_network_listen()
 * or purple_network_listen_range().
 */
void purple_network_listen_cancel(PurpleNetworkListenData *listen_data);

/**
 * purple_network_get_port_from_fd:
 * @fd: The file descriptor. This should be a tcp socket. The current
 *           implementation probably dies on anything but IPv4. Perhaps this
 *           possible bug will inspire new and valuable contributors to Purple.
 *
 * Gets a port number from a file descriptor.
 *
 * Returns: The port number, in host byte order.
 */
unsigned short purple_network_get_port_from_fd(int fd);

/**
 * purple_network_is_available:
 *
 * Detects if there is an available network connection.
 *
 * Returns: TRUE if the network is available
 */
gboolean purple_network_is_available(void);

/**
 * purple_network_force_online:
 *
 * Makes purple_network_is_available() always return %TRUE.
 *
 * This is what backs the --force-online command line argument in Pidgin,
 * for example.  This is useful for offline testing, especially when
 * combined with nullprotocol.
 */
void purple_network_force_online(void);

/**
 * purple_network_get_handle:
 *
 * Get the handle for the network system
 *
 * Returns: the handle to the network system
 */
void *purple_network_get_handle(void);

/**
 * purple_network_set_stun_server:
 * @stun_server: The host name of the STUN server to set
 *
 * Update the STUN server IP given the host name
 * Will result in a DNS query being executed asynchronous
 */
void purple_network_set_stun_server(const gchar *stun_server);

/**
 * purple_network_get_stun_ip:
 *
 * Get the IP address of the STUN server as a string representation
 *
 * Returns: the IP address
 */
const gchar *purple_network_get_stun_ip(void);

/**
 * purple_network_set_turn_server:
 * @turn_server: The host name of the TURN server to set
 *
 * Update the TURN server IP given the host name
 * Will result in a DNS query being executed asynchronous
 */
void purple_network_set_turn_server(const gchar *turn_server);

/**
 * purple_network_get_turn_ip:
 *
 * Get the IP address of the TURN server as a string representation
 *
 * Returns: the IP address
 */
const gchar *purple_network_get_turn_ip(void);

/**
 * purple_network_remove_port_mapping:
 * @fd: Socket to remove the port mapping for
 *
 * Remove a port mapping (UPnP or NAT-PMP) associated with listening socket
 */
void purple_network_remove_port_mapping(gint fd);

/**
 * purple_network_init:
 *
 * Initializes the network subsystem.
 */
void purple_network_init(void);

/**
 * purple_network_uninit:
 *
 * Shuts down the network subsystem.
 */
void purple_network_uninit(void);

G_END_DECLS

#endif /* PURPLE_NETWORK_H */